Skip to main content

HSQ

Power Point Installation & Home Wiring, Melbourne & Victoria

Never Run Out Of Power Where You Need It.

Not enough power points. Extension leads running across the floor. Appliances competing for the same circuit. HSQ Electrical installs additional power points, USB outlets, and complete home wiring solutions for Victorian homeowners, safely, cleanly, and exactly where you need them.

Why It Matters

Extension Leads Were Never Meant To Be a Permanent Solution.

Walk through most Australian homes and you’ll find the same thing, power boards daisy-chained together, extension leads running under rugs, and a single double power point doing the work of six.

It’s not just inconvenient. It’s a genuine fire and safety risk. Overloaded power boards and extension leads are one of the leading causes of residential electrical fires in Australia.

The good news is that adding power points or rewiring a room is one of the most straightforward and cost-effective electrical jobs a homeowner can invest in.

At HSQ Electrical, we install additional power points and wiring solutions across Melbourne and Victoria, giving you power exactly where you need it, done properly.

Warning Signs

Signs Your Home's Wiring Needs Professional Attention.

Multiple Power Boards

Power boards plugged into power boards or extension leads under rugs, a real overloading risk.

Power Points Feel Warm

A power point warm to the touch even unloaded is a serious wiring fault requiring immediate attention.

Sparks When Plugging In

Regular or significant sparking indicates a wiring or outlet fault that should be assessed.

Discoloured Power Points

Yellowing, cracking, or scorch marks indicate heat damage and should be replaced immediately.

Outlets That Don't Work

Intermittent or non-functioning outlets usually indicate a wiring fault needing professional diagnosis.

Home Built Before 1980

Older homes may still have original wiring not considered safe by current Australian Standards.

How It Works

Power Points Installed The Right Way. Every Time.

1

Free Quote

Tell us what you need, we provide a clear, upfront quote before scheduling

2

We Plan the Installation

We assess your switchboard capacity and confirm cable routing for new circuits.

3

Clean, Professional Installation

Licensed electricians install with minimal disruption, chasing cables and patching neatly.

4

Testing & Certification

Every new outlet and circuit tested. Certificate of Electrical Safety issued as required.

5

Tidy Handover

We clean up completely, leaving your home as we found it, just with more power where you need it.

Why Choose HSQ Electrical

Power Points Done Properly By Licensed Professionals.

REC No. 28315, Compliant

Every installation completed by a registered electrical contractor, fully compliant with Victorian regulations.

Minimal Disruption

We plan installations to minimise impact on walls and ceilings, patching any penetrations to a clean finish.

Certificate Every Time

All new wiring is certified with a Certificate of Electrical Safety upon completion.

No Job Too Small

From a single additional power point to a complete home rewire, same level of attention every time.

Upfront Transparent Pricing

We quote clearly and completely before starting, including any patching or making-good work.

Good To Know

Everything You Need To Know About Power Points & Home Wiring.

How Much Does It Cost to Install a Power Point in Victoria?

The cost of a single double power point typically ranges from $150 to $300 depending on location, cable run length, and any patching required.

Can I Install a Power Point Myself in Victoria?

No. All electrical work in Victoria must be carried out by a licensed electrician under the Electricity Safety Act 1998.

How Many Power Points Should a Room Have?

As a guide: a bedroom should have a minimum of four outlets, a living room six to eight, and a kitchen at least six dedicated outlets plus dedicated appliance circuits.

What Is a Dedicated Circuit and Do I Need One?

A dedicated circuit runs from your switchboard to a single outlet or appliance. High-draw appliances, ovens, AC, EV chargers, should always be on dedicated circuits.

What Is Involved in a Home Rewire?

Replacing all existing wiring with new cabling, circuits, outlets, switches, and connections back to the switchboard. We manage the entire process including distributor coordination.

Frequently Asked Questions

Power Point & Wiring FAQs Answered.

How long does it take to install a power point?

A single power point installation in an accessible location typically takes one to two hours.

In most cases yes, a small penetration is required. Our electricians plan cable routes to minimise wall impact and patch neatly.

Absolutely, including weatherproof outdoor outlets and dedicated circuits for power tools.

As early as possible. Ideally before walls are closed so rough-in wiring can be done.

Yes. HSQ Electrical issues this certificate as standard on every job.

Stop Relying On Extension Leads.

Power points installed safely, cleanly, and exactly where you need them, across Melbourne and all of Victoria. Whether it’s a single outlet or a complete rewire, HSQ Electrical provides free quotes backed by over a decade of experience.

Get In Touch

Tell Us About Your Project.

Contact Form Demo
Your details are kept completely private and will only be used to respond to your enquiry.