Skip to main content

HSQ

Home EV Charger Installation, Melbourne & Victoria

Wake Up Every Morning With a Full Charge.

Charging your EV from a standard power point is slow, inefficient, and hard on your battery. A professionally installed home charger delivers faster, safer, smarter charging, every night. HSQ Electrical installs home EV charging solutions across Melbourne and all of Victoria.

Why a Dedicated EV Charger

Your Standard Power Point Was Never Designed For This.

A standard 10-amp household power point will charge your EV, just very, very slowly. A typical EV gains approximately 10–15km of range per hour from a standard outlet. A full charge takes 24–40 hours.

A dedicated home EV charger, installed on a dedicated circuit by a licensed electrician, changes everything. A quality Level 2 charger delivers 7–22kW, adding 40–120km per hour. Most owners wake up with a full charge after plugging in overnight.

Faster. Safer. Smarter. And a setup that’s designed to last, not an extension lead snaking across your garage floor.

At HSQ Electrical, we install home EV charging solutions for every major EV brand across Melbourne and Victoria.

Understanding EV Charging

Level 1 vs Level 2, The Difference Is Massive.

2.4kW

Level 1 (Power Point)

10–15 km/hr · 24–40 hours full charge

7-22kW

Level 2 (Home Charger)

40–120 km/hr · 4–10 hours full charge

All EVs

Type 2 Connector

Compatible with every Australian EV

32A

Dedicated Circuit

Required for safe operation

How It Works

Your Home EV Charger Installed From Start to Finish.

1

Free Consultation & Quote

Tell us about your EV, home, and preferred location. We assess switchboard capacity and provide an upfront quote.

2

Charger Selection

We recommend the right charger for your vehicle, electrical capacity, and budget, including smart and solar options.

3

Switchboard Assessment & Upgrade

Switchboard capacity assessed. Required upgrades carried out before installation for safe, compliant operation.

4

Professional Installation

Licensed electricians install dedicated EV circuit and wall-mounted charger to a clean, professional finish.

5

Testing & Configuration

Tested and configured, including smart schedules and solar integration. Walkthrough before we leave.

6

Certificate of Electrical Safety

Issued upon completion certifying compliance with all Victorian regulations and Australian Standards.

Why Choose HSQ Electrical

EV Charger Installation Done By Licensed Electrical Professionals.

REC No. 28315, Compliant

Every installation completed under REC No. 28315 and registered with Energy Safe Victoria.

Dedicated Circuit. Every Time.

We never install on a shared circuit, every installation includes a dedicated 32-amp circuit for maximum performance.

All EV Brands Supported

Type 2 compatible chargers for every Australian-market EV, Tesla, BYD, Kia, Hyundai, MG, BMW, Mercedes, and more.

Solar Integration Capability

We design installations with solar integration in mind, for current or future systems.

Quality Chargers. Genuine Warranties.

Only chargers from reputable manufacturers with genuine Australian warranties and local support.

Certificate Every Installation

Certificate of Electrical Safety issued, your assurance the work was done safely and correctly.

Good To Know

Everything Victorian EV Owners Need To Know About Home Charging.

How Much Does Home EV Charger Installation Cost in Victoria?

Typically $1,200–$2,500 installed depending on charger model, cable run, and whether a switchboard upgrade is needed. Smart and solar-integrated chargers sit at the higher end.

Do I Need to Upgrade My Switchboard?

Not always, but often. A 7kW charger draws 32A on a dedicated circuit. Many older Victorian switchboards can’t accommodate this. Our pre-installation assessment includes a capacity check.

Can I Charge My EV With Solar Power?

Yes, and it’s one of the most compelling combinations in home energy management. A smart charger can be configured to draw from solar generation preferentially.

What If I Buy a Different EV Later?

All current Australian-market EVs use the Type 2 charging standard, your installation will be compatible with any EV you purchase in the future.

Frequently Asked Questions

Home EV Charger FAQs Answered.

How long does EV charger installation take?

Most residential installations are completed in one to two days. Larger systems or those requiring switchboard upgrades may take longer.

Yes, quality solar systems add measurable value to Australian properties and are an attractive feature for buyers.

Yes. We design HSQ solar systems with future battery compatibility in mind.

Standard grid-connected solar shuts down during outages (safety requirement). A battery system with blackout protection can maintain power.

Yes, all required accreditations including Clean Energy Council requirements. Installations under REC No. 28315.

Your EV Deserves Better Than a Power Board.

A professionally installed home EV charger is one of the smartest investments an EV owner can make, faster, safer, and works every night without compromise. Across Melbourne and all of Victoria.

Get In Touch

Tell Us About Your Project.

Contact Form Demo
Your details are kept completely private and will only be used to respond to your enquiry.